Green
Building Glossary
Glossary of Green Building Terms Helpful for Understanding Concepts
Inherent to Green and Energy-Efficient Building
Definitions are slanted to green building in North Central Texas,
972 251-1532 or 817 545-0140
Absorption
Absorption, in chemistry, is a process in which atoms, molecules, or
ions enter some bulk phase - gas, liquid or solid material. This is a
different process from adsorption, since the
molecules are taken up by the volume, not by surface.
Accreditation
The process of certifying a Home Energy Rating System (HERS) as being
compliant with the national industry standard operating procedures for
Home Energy Rating System.
Active Solar
Active solar uses mechanical devices such as photovoltaic panels to
transfer collected heat from the sun to storage mediums and/or end use.
Thus, solar radiation is used by special equipment to provide our homes
with space heating, hot water, and/or electricity.
Adsorption
Adsorption is a process that occurs when a gas or liquid solute
accumulates on the surface of a solid or a liquid (adsorbent), forming a
molecular or atomic film (the adsorbate).
AFUE Annual Fuel Utilization Efficiency (AFUE)
Air Barrier
The primary function of an air barrier is to control airflow between a
conditioned space and an unconditioned space. Air barrier systems are a
component of building envelope systems that control the movement of air
in and out of buildings. Many performance problems of homes can be
traced to air leakage through the building envelope. These problems
include everything from high heating/cooling costs to poor temperature
control in occupied spaces to moisture.
Air Flow Retarder
Sealants used to keep outside air and inside air out of the building
envelope. Four common approaches to retarding air flow include careful
sealing using the following building components: drywall and framing,
plastic sheets (should not to be used in hot and humid climates) between
drywall and framing, exterior sheathing, and building paper. Air flow
retarders define the pressure boundary in a house that separates indoor
and outdoor air.
Air Handler
Fan used by a heat pump. central air conditioning system, or furnace uses to distribute
heated or cooled air throughout a home or building
Air-Impermeable
A material or assembly having an air permeance equal to or less than
0.02 l/(s-m2) @ 75 Pa tested according to ASTM E 2178 or E 283.
Biodegradable
Capable of being decomposed by living organisms.
Biomass Energy
Energy produced by the conversion of
biomass directly to heat or to a liquid or gas that can be converted to
energy. It comes from materials that were once living, such as plants of
some types of waste. A form
of renewable energy.
Building
Envelope or Enclosure
The outer shell, or the elements of a building, such as walls, floors,
and ceilings, that enclose conditioned space.
Btu (British Thermal Unit)
CABO (Council of American Building Officials)
Capacity
The rate at which a piece of equipment works. Cooling capacity is the
amount of heat a cooling system can remove from the air. For air
conditioners total capacity is the sum of latent capacity, the ability
to remove moisture from the air, and the sensible capacity, the ability
to reduce dry-bulb temperature. Heating system capacity indicates how
much heat a system can provide. Heating and cooling capacities are rated
in Btu per hour
Casement
Window
A window with a hinged sash that swings like a door, often with fixed
panels, too. When windows crank out, casement windows can be used in
green building to catch and funnel prevailing breezes into home.
Channel Air Flow
Channel air flow is air passing through openings in the building
envelope typically found at the interface of dissimilar materials where
the air entry and exit points are not in a linear pathway.
Chase
An enclosure designed to hold ducts, plumbing, electric, telephone,
cable, or other linear components. A chase designed for ducts should be
in conditioned space and include air flow retarders and thermal barriers
between it and unconditioned spaces such as attics.
Clerestory
Window
A clerestory, pronounced clear story, is a high wall with a band of
narrow windows along the very top. The clerestory wall often rises above
adjoining roofs. In green home building, clerestory windows add natural
light to potentially dark rooms or areas, can act as loft windows, and,
when they open, can provide a thermal chimney.
Concentration
The relative amount of a substance mixed with another substance. An example is five parts per million of carbon monoxide in air or 1 milligram/liter of iron in water.
Condensation
Condensation is the process in the hydrologic cycle by which a vapor
becomes a liquid; the opposite of evaporation.
Conditioned
Space
The part of the building that is
designed to be thermally conditioned, normally for the comfort of
occupants but at times for other reasons.
Conduction
Conduction is the transfer of heat through a material. Heat is
transferred directly in and through the substance. Conduction heat loss
or gain results from the transfer of heat directly through the materials
of the building envelope. If the outside temperature is greater than the
inside temperature, there is heat gain from outside the building. More
about conduction.
Conservation
Preserving and renewing natural resources to assure their highest
economic or social benefit over the longest period of time. Green
building, by definition, conserves resources both for the present and
for the use of future generations.
Construction Documents
The drawings (plans) and written specifications that describe
construction requirements for a building.
Convection
Convection is the transfer of heat from particle to particle. It is the
transfer of heat by the movement of fluids such as air or water. For
example, the heated air around a stove will tend to rise to the ceiling.
We all know hot air rises and cool air sinks. That is natural
convection. Forced convection refers to the use of fans or pumps to move
a fluid/air and the heat contained in it. We generally have forced-air
furnaces in our homes. More
about convection.
COP (Coefficient of Performance)
Debt-to-Income Ratio
Dew Point
Dew point is the temperature to which air with a given quantity of water
vapor must be cooled to cause condensation of the vapor in the air. The
temperature of which air must be cooled for it to be saturated.
Diffuse Air Flow
The passage of air through porous building materials such as fiberglass
or uncoated concrete block is diffuse air flow.
Diffusion
The movement of a substance from an area of high concentration to an
area of low concentration.
Drainage Plane
Drainage planes are water repellent materials such as building paper,
housewrap, and foam insulation which drain water. They provide water
drainage to the exterior of the building. The materials that form the
drainage plane overlap each other shingle fashion or are sealed so that
water flow is downward and outward.
Drought
An
extended period with little or no precipitation.
Dry-Bulb Temperature
ECM (Energy Conservation Measure)
EEM (Energy Efficient Mortgage)
EER (Energy Efficiency Ratio)
EF (Energy Factor)
Emissivity
The ability of a material to hold or release heat. Don't confuse with
conductivity.
Energy (use)
Energy Audit
Energy Star® Home
A home, certified by the U.S. Environmental Protection Agency (EPA),
that is at least 30% more energy efficient than the minimum national
standard for home energy efficiency as specified by the 1992 MEC, or as
defined for specific states or regions. ENERGY STAR is a registered
trademark of the EPA.
Equivalent Leakage Area of a building
(EqLA or ELA)
Quantitative expression of the airtightness of a building enclosure.
EqLA is the method set by the Canadian General Standards Board in which
a blower door depressurizes the building enclosure to 10 Pascals and the
leakiness of the enclosure is expressed as a summary hole in square
inches. ELA is set by the ASTM equivalent procedure at a pressure
differential of 4 Pascals.
Erosion:
The wearing down or washing away of the soil from the action of water,
wind, or ice.
Evaporation: The conversion of a liquid into a vapor
usually through the application of heat energy during the hydrologic
cycle; the opposite of condensation.
Fannie Mae (FNMA - Federal National Mortgage Association)
Fenestration
The arrangement or placement of windows or other openings in a building.
FHA (Federal Housing Administration)
Filtering: The soil's ability to retain substances on the soil particle surface.
Freddie Mac (FHLMC - Federal Home Loan
Mortgage Corporation)
A stockholder-owned organization, chartered by the U.S. Congress to
increase the supply of mortgage funds. Freddie Mac purchases
conventional mortgages from insured depository institutions and
HUD-approved mortgage bankers.
Fresh Water: Water with less than 0.5 parts per thousand dissolved salts.
Geothermal Energy
Energy from within the earth: Natural
heat contained in the rocks, hot water and steam of earth's subsurface. A form
of renewable energy.
Glazing
Refers to both the type of glass used in a window and the actual process of installing glass in the window frame or sash.
Grade Beam
A foundation wall that is poured at or just below the grade of the
earth, most often associated with the deepened perimeter concrete
section in slab-on-grade foundations.
Gray Water: Domestic wastewater composed of wash water from household sinks, tubs, and washers.
Greenhouse Effect
The greenhouse effect is the process in which the emission of infrared
radiation by the atmosphere warms a planet's surface. The sun radiates
energy to the earth. The earth reflects back about 30% of this solar
radiation. The remaining 70% is absorbed and warms the earth's
atmosphere, land, and water. The Earth's average surface temperature of
59 °F is about 59 °) warmer than it would be without the greenhouse
effect. More about
greenhouse effect.
Groundwater
Groundwater is a natural resource composed of water found in the
spaces between soil particles and cracks in rocks underground.
Habitable
and/or Occupiable Space
Habitable space
is an area in a structure for living, sleeping, eating or cooking. It
is building space intended for continual human occupancy. Bathrooms,
closets, hallways, storage or utility space are not considered habitable
space.
Occupiable
Space is any enclosed space
intended for human activities, including but not limited to, all
habitable spaces, toilets, closets, halls, storage and utility areas,
and laundry areas.
Haze Factor
The percentage of light through a glazing material that is not diffused. The ratio between the luminescence of an object and the luminescence of the scattering medium through which it is being viewed.
HERS (Home Energy Rating System)
A standardized system for rating the energy-efficiency of residential
buildings.
HERS Energy-Efficient Reference Home (EERH)
The EERH is a geometric "twin" to a home being evaluated for a
HERS rating and according to a newly-revised system, is configured to be
minimally compliant with the 2004 International Energy Conservation
Code.
HERS Provider
An individual or organization responsible for the operation and
management of a Home Energy Rating System (HERS).
HERS Rater
An individual certified to perform residential building energy
efficiency ratings in the class for which the rater is certified.
HERS Score
A value between 0 and 100 indicating the relative energy efficiency of a
given home as compared with the HERS Energy-Efficient Reference Home as
specified by the HERS Council Guidelines. The greater the score, the
more efficient the home. A home with zero energy use for the rated
energy uses (heating, cooling and hot water only) scores 100 and the
HERS Reference Home scores 80. Every one point increase in the HERS
score amounts to a 5% increase in energy efficiency.
Housewrap
Any of several spun-fiber polyolefin rolled sheet goods for wrapping the
exterior of the building envelope.
HSPF (Heating Season Performance Factor)
A measurement of the seasonal efficiency of an electric heat pump using a
standard heating load and outdoor climate profile over a standard heating
season. It represents the total seasonal heating output in Btu divided by the
total seasonal electric power input in watt-hours (Wh). Thus, the resultant
value for HSPF has units of Btu/Wh.
Humidity
Humidity is the amount of water vapor in the air. It is measured in
three ways: absolute humidity, relative humidity, and specific humidity.
Hydroelectric Energy
Electricity generated from the force of moving or falling water. A form
of renewable energy.
Hydrophilic
Having a strong attraction to water. Hydrophilic molecules are soluble in water and travel with the groundwater.
Hydrophobic
Having a strong aversion for water. Hydrophobic molecules are relatively insoluble in water and tend to sorb to soil particles.
Indoor Air
Air in a conditioned space.
Indoor
Air Quality
Indoor air quality refers to the presence or absence of
air pollutants in buildings. More about indoor air quality.
Infrared Emittance
Infrared emittance is a decimal number less than one that represents the
fraction of heat that is re-radiated from a material to it’s surroundings.
Insulated
Glazing
Insulated Glazing Unit or Insulating Glass Unit (commonly referred to as
IGU) is a set of two or more layers of glass spaced apart and
hermetically sealed to form a single glazed unit with an air space
between each layer. It is used to improve the thermal performance of
glass in a green-built home. Since glass has no insulative properties,
it is actually the air space between the glass layers that provides the
insulation .
More
about windows.
The most commonly found IGUs are double glazed, i.e. made with two layers of glass and are therefore also referred to as "double glazing units." Affordable argon is commonly used in insulated glazing. Another name often used in North America is Sealed Insulating Glass (abbreviated SIG).
Irrigation
Irrigation is the controlled application of water to home gardens
and yards.
Jump Duct
A flexible, short, U-shaped duct (typically 10-inch diameter) that
connects a room to a common space as a pressure balancing mechanism.
Jump ducts serve the same function as transfer grilles.
Kiln-dried Lumber
Any lumber placed in a heated chamber to reduce its moisture content to a specified
average under controlled conditions.
Leaching
Leaching is the process by which soluble materials in the soil, such
as salts, nutrients, pesticide chemicals, or contaminants, are dissolved
and carried away by water.
Load
The quantity of heat that must be added to or removed from the building
(or the hot water tank) to satisfy specific levels of service, such as
maintaining space temperature or hot water temperature at a specified
thermostat setting (see also the definitions of energy and thermostat).
Low-E
Refers to a coating for high-performance windows, the "E"
stands for emissivity or re-radiated heat flow. The thin metallic oxide
coating increases the U-value of the window by reducing heat flow from a
warm(er) air space to a cold(er) glazing surface. Low-E coatings allow
short-wavelength solar radiation through windows,
but reflect back longer wavelengths of heat.
Low-E Windows
Most often used in reference to a
coating for high-performance windows, the "e" stands for
emissivity. Low-e
windows have microscopically thin layers of metallic oxide bonded to the
surface of a window's glass and are essentially invisible to the
naked eye, yet able to reduce the U-factor by reducing heat flow from a
warm(er) air space to a cold(er) glazing surface. A
low-e coating works like an invisible mirror to reflect selected
portions of the light spectrum back out or back in through windows. The
best location for the coating is based on whether the primary heat flow
you want to control is from the inside out (heating climates) or the
outside in (cooling climates). There is no reason to have a low-E window
in the cooling climate of the south if the sun does not hit that window.
Low VOC
A substance that evaporates slowly. Often used to refer to material such as
paint or adhesives used in homes and buildings. There is confusion about
low VOC. See Semivolatilre Organic Compound.
More about VOCs.
Mechanical Ventilation
The active process of supplying or removing air to or from an indoor
space by powered equipment such as motor-driven fans and blowers, but
not by devices such as wind-driven turbine ventilators and mechanically
operated windows.
Model Energy Code (MEC) A "model" national standard for residential energy efficiency. The MEC was developed through a national consensus process by the Council of American Building Officials (CABO) and is the accepted national minimum efficiency standard for residential construction. Since MEC is a model code, it does not have the "force of law" until it is adopted by a local code authority. The MEC is used as the national standard for determining Energy Efficient Mortgage (EEM) qualification, and it serves as the national "reference point" used by Home Energy Rating Systems (HERS) in the determination of energy ratings for homes.
Net Zero Energy House
Any house that over time, averages out to net zero energy consumption. A
net zero energy home may supply more energy than it needs during peak demand, typically using one or more solar energy strategies, energy storage and/or net metering.
A net zero energy house produces as much
energy as it uses.
Outdoor
Air
Air outside the building.
Orifice Air Flow
Air flow where the air entry point and exit point are in a linear
pathway; such as a crack between a window frame and the window opening
is orifice air flow.
Ozone
Ozone is a pollutant at ground level but it is a solar shield in the upper atmosphere.
Passive Solar
Passive solar design uses the sun's radiant energy with natural
mechanisms such as conduction and air convection currents. Passive solar
utilizes the sun's energy for heating and natural processes for cooling,
with only negligibly small requirements for nonrenewable energy. In
North Central Texas, passive solar design is more concerned with cooling
than heating. More about
passive solar design.
Performance Test
An on-site measurement of the energy performance of a building energy
feature or an energy using device conducted in accordance with
pre-defined testing and measurement protocols and analysis and
computation methods. Such protocols and methods may be defined by
national consensus standards like those of the American Society of
Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) and the
American Society for Test and Measurement (ASTM).
Permeable Paving
Permeable paving is a term used to describe a paving method that allows
water and air to move through the paving material. More
about paving.
Permeance
Permeance is the ease at which water molecules diffuse through a material. It is to vapor diffusion
as conductance is to heat transfer. The unit of measurement is typically the "perm."
Pervious Paving
Pervious paving is a term used to describe a paving method that allows
water and air to move through the paving material. More
about paving.
Phase change
Phase change happens at constant temperatures with the movement of
energy or latent heat. More
about phase change.
P.I.T.I.
An abbreviation which stands for principal, interest, taxes, and
insurance. These generally represent a borrower’s total monthly
payment obligations on a home loan. The taxes and insurance portion are
often paid monthly to an impound or escrow account and may be adjusted
annually to reflect changes in the cost of each.
P.I.T.I.U.
Adds utility payments to the abbreviation which stands for
principal, interest, taxes, and insurance to truly reflect the monthly
costs of a home.
Porous Paving
Porous paving is a term used to describe a paving method that allows
water and air to move through the paving material. More
about paving.
Potable Water: Water of suitable quality for drinking.
Precipitation: The part of the hydrologic cycle when water falls, in a liquid or solid state, from the atmosphere to Earth as in rain, sleet, or snow.
Pressure Boundary
The point in a building at which inside air and outside air are
separated. If a building were a balloon, the rubber skin would form the
pressure boundary. Where inside and outside air freely mingle there is
no pressure boundary.
Pressurization Test
A procedure in which a fan is used to place a house, duct system, or
other container, under positive or negative air pressure in order to
calculate air leakage.
R-Value
R value is the quantitative measure of resistance to heat flow or
conductivity and is the reciprocal of U-factor. The units for R-value
are ft2 °F hr/Btu (English) or m2 °K hr/W (SI or metric).
Radiant
Barrier
All materials emit energy by thermal
radiation as a result of temperature. Radiant barriers or reflective
barriers work by reducing the heat transfer from thermal radiation.
Radiant barriers must face an open air space to perform properly as they
transfer heat only across air spaces. Although radiant barrier works as
heat control in Dallas Fort Worth, it is not the best heat control for
attics in this area.
Radiation
Radiation is energy transmitted directly through space. Although it does
not require matter in transmission, it does require a line of sight
connection between the objects. All objects radiate energy or heat,
which heats all cooler objects around it. Solar radiation passes through
space to heat (and light) objects that it strikes. More
about radiation.
Reclaimed wastewater: Treated wastewater that can be used for beneficial purposes, such as irrigating certain plants.
Recycled water: Water that is used more than one time before it passes back into the natural system.
Relative Humidity
Relative Humidity is the ratio of the amount of water vapor in the air
at a specific temperature to the maximum amount that the air could hold
at that temperature, expressed as a percentage.
Renewable Energy
Renewable energy is energy generated from resources that are unlimited, rapidly replenished or naturally renewable such as wind, water, sun, wave and waste matter.
It is energy flows which occur naturally and repeatedly in the environment. More
about renewable energy.
Runoff: Precipitation that flows over land to surface streams, rivers, and lakes.
Saturated
Being saturated is being the most concentrated solution possible at a
given temperature; unable to dissolve still more of a substance. Filled
to repletion; holding by absorption, or in solution, all that is
possible.
Sealed Combustion
Sealed combustion means that a combustion appliance, such as a furnace,
water heater, or fireplace, acquires all air for combustion though a
dedicated sealed passage from the outside; combustion occurs in a sealed
combustion chamber, and all combustion products are vented to the
outside through a separate dedicated sealed vent.
SEER (Seasonal
Energy Efficiency Ratio)
SEER is the most commonly used measure of
the efficiency of consumer central air conditioning systems. A high SEER
rating is not of prime importance in North Central Texas.
Septic system
Septic systems are used to treat household
sewage and wastewater by allowing the solids to decompose and settle in
a tank, then letting the liquid be absorbed by the soil in a drainage
field. Septic systems are normally used in home construction only
when a sewer line is not available.
Semi-Permeable
The term vapor semi-permeable describes a material with a water vapor
permeance between 1 and 10 Perms. Water vapor can pass through a
semi-permeable material but at a slow rate.
Semivolatile Organic Compound (SVOC)
A substance that evaporates slowly at standard temperature (20° C and 1 atm pressure).
More about VOCs.
Shading Coefficient (SC)
The ratio of the total solar heat admittance through a given glazing
product relative to the solar heat admittance of double-strength, clear
glass at normal solar incidence (i.e. perpendicular to the glazing
surface).
Skylight
A glaxing and framing assembly consisting of sloped or possibly vertical
surfaces. The assembly is generally inserted into a building to admit daylight.
See haze factor, low-E, glazing,
U-value.
Solar Energy
Energy derived from the sun in the form of solar radiation--electromagnetic radiation emitted by the sun.
A form of renewable energy.
Solar Heat Gain Coefficient (SHGC)
SHGC measures how well a window blocks heat caused by sunlight. The
lower the SHGC rating the less solar heat the window transmits. This
rating is expressed as a fraction between 0 and 1. The number is the
ratio of a window’s solar heat admittance compared to the total solar
heat available on the exterior window surface at normal solar incidence
(i.e. perpendicular to the glazing surface).
Solar Reflectance/Reflectivity
Solar reflectance is a decimal number less than one that represents the
fraction of light reflected off the roof.
Solar reflectivity is the percentage of sunlight that is reflected by an object when
"hit" by sunlight.
Sone
A sound rating. Fans rated 1.5 sones and below are considered very
quiet.
Sorption
The action by which molecules are attracted to or attach to solid particles, including soil.
Specific Heat
Specific heat is the amount of heat required to raise the
temperature of one gram of a substance 1 degree Celsius
Specific
Humidity
The water vapor content measured
as weight of vapor per unit weight of air.
Spring
A spring is a point where groundwater flows or
seeps from the ground.
Storm Drain
A storm drain allows water runoff from homes,
streets, and other properties to flow into an underground system.
Sublimation
The transition of a substance from the solid
phase directly to the vapor phase, or vice versa, without passing
through an intermediate liquid phase is sublimation.
Subflorescence/Sub-efflorescence
A potentially harmful accumulation of water soluble salts that recrystalize
beneath the masonry surface as moisture in the wall evaporates.
Supply ducts
The ducts in a forced air heating or cooling system that supply heated
or cooled air from the or air conditioner to conditioned spaces.
Surface Water
Water above the surface of the land, including
creeks, ponds, floodwater, and runoff is called surface water.
Temperature
Temperature is a measure of the heat content of a body. The molecular
motion of a substance creates energy, which can be measured in terms of
the heat it generates.
Temporary
Wetland
A vernal pool or wetland in which water is
present for only part of the year, usually during wet or rainy seasons.
Thermal Boundary
The border between conditioned and unconditioned space where insulation
should be placed.
Thermal
Chimney
The use of thermal chimneys in a home creates or reinforces the effect
hot air rising to induce air movement for cooling purposes.
Thermal Mass
The use of thermal mass in a home prevents rapid temperature
fluctuations by using materials such as masonry and water that can store
heat energy for extended time.
Thermostat
A control device that measures the temperature of the air in a home or
the water in a hot water tank and activates heating or cooling equipment
to cause the air or water temperature to remain at a pre-specified
value, normally called the set point temperature.
Tidal Energy
Tidal energy is from the ebb and flow
of the tide. Tidal changes in sea level can be used to generate
electricity by constructing dams across coastal bays or estuaries. A
form of renewable energy.
Ton(s) of Refrigeration
Units used to characterize the cooling capacity of air conditioning
equipment. One ton equals 12,000 Btu/h.
U-Factor
The U-factor is a measure of heat flow or conductivity through a
material, the reciprocal of R-value. Although R-values are used as for
measures of the resistance to heat flow for individual building
materials, U-factor is always used to measure the conductive energy of
building enclosures.
Vapor
The state of water in the
hydrologic cycle in which individual molecules are highly energized and
move about freely; also known as gas/gaseous.
Vapor
Barrier
A
vapor barrier is a material that is vapor impermeable and has a permeance of 0.1 perm or less. A vapor barrier is a Class I
vapor control layer.
Vapor
Impermeable
Materials with a permeance
of 0.1 perm or less such as glass, polyethylene film, and aluminum foil.
Vapor
Permeable
Materials with a permeance
of greater than 10 perms such as housewraps and building papers.
Vapor
Permeance
Classes Test procedure for
determining vapor permeance class is ASTM E-96 Test Method A-the desiccant or
dry cup method.
Vapor Retarder
A vapor retarder is a material that has a permeance of 1.0 perm or less and greater than 0.1 perm. A vapor retarder is a material that is vapor semi-impermeable. A vapor retarder is a Class II vapor control layer.
Vapor Semi-Impermeable
Materials with a permeance of 1.0 perm or less and greater than 0.1 perm such as
oil-based paints and many vinyl coverings.
Vapor Semi-Permeable
Materials with a permeance of 10 perms or less and greater than 1.0 perm such as
plywood, OSB and most latex-based paints.
Ventilation
The controlled movement of air into and out of a house.
Volatile
Any substance which evaporates quickly.
Volatile Organic Compound (VOC)
Any organic compound which evaporates readily to the atmosphere. VOCs contribute significantly to photochemical smog production and certain health problems.
More about VOCs.
Volatilization
A process by which a chemical evaporates.
W (watt)
One of two (Btu/h is the other) standard units of measure for the rate
at which energy is consumed by equipment or the rate at which energy
moves from one location to another. It is also the standard unit of
measure for electrical power.
Water (H2O)
Water is an odorless, tasteless, colorless liquid made up of a
combination of hydrogen and oxygen. Water forms streams, lakes, and
seas, and is a major constituent of all living matter. the conservation
of water is part of green building.
Water Cycle
The paths water takes through its various states--vapor, liquid,
solid--as it moves throughout the oceans, atmosphere, groundwater, and
streams. Also known as the Hydrologic cycle.
Water Resistant Barrier (WRB)
A water resistant barrier is also referred to as a drainage
plane.
Wastewater
Water that contains unwanted
materials from homes and other human uses. It is a mixture of water and
dissolved or suspended substances.
Wastewater Treatment
Any of the mechanical or chemical processes used to modify the
quality of wastewater in order to make it more compatible or acceptable
to humans and the environment.
Wave Energy
Tidal energy is from the ebb and flow
of the tide. Tidal changes in sea level can be used to generate
electricity by constructing dams across coastal bays or estuaries. A
form of renewable energy.
Wet-Bulb Temperature
A measure of combined heat and humidity. At the same temperature, air
with less relative humidity has a lower wet-bulb temperature.
Wetlands
Wetlands are areas where water saturation is the dominant factor in
determining the nature of soil development and the types of plant and
animal communities. A green developer will respect wetlands.
Wind Energy or Power
Energy obtained from turbine engines powered by wind. Wind is generated from the uneven solar heating of the earth. As air flows past the rotors of a turbine, the spinning rotor drives the shaft of an electric generator.
A form of renewable energy.
Wind-Washing
Air movement due to increased pressure differences that occur at the
outside corners and roof eaves of buildings. Wind-washing can have
significant impact on thermal and moisture movement and hence thermal
and moisture performance of exterior wall assemblies.
Wing Wall
A wing wall is a vertical exterior wall partition. When placed
perpendicular to adjoining windows it will enhance ventilation through
the windows. A side-opening casement window can create a mini-wing wall.
Xeriscaping
Zero Energy House
Any house that uses about half
the energy of traditional construction be described as a zero energy
house. It is more a definition of an energy-efficient house than an actual zero
energy house which is now defined as a Net Zero Energy House.
Contact Terry Jensen at 972 251-1532 or 817 545-0140.
Green Building Glossary is copyrighted by DFW Green Building and
is used with permission. Use without written permission is prohibited.Ecovillage
Renewable Energy in DFW
Contact
Copyright © 2007-2009
Dallas-Fort Worth Green Building. All rights reserved.