Windows, Energy-Efficient Windows, Green Building, Passtionate Green Builder, Energy-Efficient HomesPlease Note:This website explains green building for a climate zone comparable to North Texas or Central Texas, such as the climate of Waco or Dallas-Fort Worth, Texas. It is important to hire a green builder who is an expert in energy-efficient building in your climate zone.
This website is for the climate zone that includes North Central Texas or the DFW area such as Plano, Keller, or Dallas-Fort Worth Texas. Regardless of your climate zone, the first priority for green building or energy-efficient remodeling is to hire an energy consultant and a green builder who understand and use up-to-date green building practices for your area.
A window with a hinged sash that swings like a door, often with fixed panels, too. When windows crank out, casement windows can be used in green building to catch and funnel prevailing breezes into home. Prevailing breezes in the Dallas-Fort Worth area are from the south and southeast.
A clerestory, pronounced clear story, is a high wall with a band of narrow windows along the very top. The clerestory wall often rises above adjoining roofs. In green home building, clerestory windows add natural light to potentially dark rooms or areas, can act as loft windows, and, when they open, can provide a thermal chimney.
Insulated Glazing Unit or Insulating Glass Unit (commonly referred to as IGU) is a set of two or more layers of glass spaced apart and hermetically sealed to form a single glazed unit with an air space between each layer. The most commonly found IGUs are double glazed, i.e. made with two layers of glass. Triple-glazed units are not necessary in the south.
Another name often used in North America is Sealed Insulating Glass (abbreviated SIG).
The purpose of low-e windows in the south is to admit less solar heat. Sun must strike the windows for solar heat to be admitted. If sun never strikes windows or only strikes the windows during the winter months, low-e windows are a waste of money. Or worse, low-e windows will stop heat from entering the windows during the winter and destroy a favorite "warm spot" in the sun.
Low-e coatings were originally manufactured to save energy in cold climates. They kept heat in without keeping heat out. Heat needs to be kept out of homes in Dallas-Fort Worth most of the year. When manufacturers introduced windows with coatings which admit up to 40 percent less solar heat, low-e windows became practical for the south.
Note the energy ratings on the Energy Star or National Fenestration Rating Council (NFRC) label. To meet the standards for Dallas-Fort Worth, windows must have a SHGC rating of .40 or lower and a U-factor of .75 or lower. The NFRC label also contains the VLT rating which indicates the percent of visible light able to pass through the glazing. Look for a VLT rating of .60 to .80 (60% to 80%) to obtain adequate daylight from your window.
Even though you can see through low-e coatings, they’re not totally invisible and may appear as a slight tint on the glass.
More about Low-E windows.
Do you need an energy consult or energy audit or green builder/remodeler in North Central Texas or the Dallas-Fort Worth area? Contact Terry Jensen Frugal Energy, LLC 817 443-2553 or 972 251-1532
Note: The opinions expressedherein are exclusively those of the writers or other participants and do not necessarily reflect theposition of CyberParent,LLC. They are not intended to take the place of advice of ahealth, legal, or other professional whose expertise you might need to seek.This website explains green building and green remodeling for a climate zonecomparable to North Central Texas or Dallas-Fort Worth, Texas, It isimportant to hire a green builder and an energy consultant who are experts inenergy-efficient building in your climate zone and who use the most up-to-dategreen building information.