Difference Permeance Permeability

Difference Permeance, Green-Built, North Texas, Permeability, Central Texas, Defines, North Central Texas, Glossary, Green Buiding, Green Homes, Green Builder, Energy-Efficient Houses

The Difference Between Permeance and Permeability

Everything is permeable. Some materials are more permeable than others. What is the difference between permeance and permeability?

The moisture transmission rate of a material is referred to as its permeability, stated in perm inches. Permeance is the number that should be used to compare various products in regard to moisture transmission resistance.

Even though this number is not dependent on the materials’ thickness, its’ permeance, is dependent on thickness much like the R-value in heat transmission. Dividing the permeability of a material by its’ thickness gives the materials’ permeance, stated in perms.

Water vapor permeance is also a measurement of vapor transmission. However it is a performance evaluation, and not a property of a material.

U.S. units are typically reported as perm-inch (1 perm-inch = the passage of 1 grain of vapor through 1ft2 of 1 inch thick material in 1 hour under a pressure difference of 1 inch of mercury).

Water vapor permeability is commonly used to describe the water vapor passage through bulk materials such as thermal insulation. U.S. units are typically reported as perms (1 perm = the passage of 1 grain of vapor through 1ft2 of material in 1 hour under a vapor pressure of 1 inch of mercury).

Water vapor permeance is commonly used for reporting the water vapor that passes through thin materials such as insulation coatings. (This link was checked on Mar-01-2004Online source) [Note: 1 ng/(s.m^2.Pa) = 1.459 perm/inch] Permeability is the rate that water or vapor will pass through a membrane. The test used is Moisture Vapor Transmission ASTM-E 96 or Moisture Vapor Permeability D-1653. The results are measured in “perms”. The lower the number the less moisture vapor will come through the membrane. This is extremely important in immersion conditions. Lower permeability is better.

Back to glossary

Do you need an energy consultant, energy auditor, green builder, or green remodeler in North Central Texas or the Dallas-Fort Worth area? Contact Terry JensenFrugal Energy, LLC 972 251-1532 or 817 443-2553

Note: The opinions expressedherein are exclusively those of the writers or other participants and do not necessarily reflect theposition of CyberParent,LLC. They are not intended to take the place of advice of ahealth, legal, or other professional whose expertise you might need to seek.This website explains green building and green remodeling for a climate zonecomparable to North Central Texas or Dallas-Fort Worth, Texas, It isimportant to hire a green builder and an energy consultant who are experts inenergy-efficient building in your climate zone and who use the most up-to-dategreen building information.

You might also like More from author